DIY Tassel & Bead Chain Necklace Tutorial

DIY Tassel & Bead Chain Necklace Tutorial

Monday, July 11, 2011

DIY jewelry collection.

There was a lot of love for the Seed Bead necklace Let's get started with what you'll need:

Also not listed is a pair of wire cutters to cut your chain and some sort of fabric (details to follow) for your tassel.  The beads I used are a glass bead and cost a total of $6 from a genuine bead store.  I also wanted a more unique looking chain than the options I found at Michael's so I bought my chain for $3.99 at the same bead store.  The crimp beads are on the smaller side, but any size will do really; the jump rings are 7mm, the head pins are 2 inches but you can definitely use shorter ones, and the bead wire is 9.2m.

Start by adding a jump ring to one end of the chain and then with a crimp bead already on the stringing wire, loop the stringing wire through the jump ring

 Make a loop of the wire and put the other looped end of the wire through the crimp bead

 Just like so

 Pull tight and as close to the edge of the jump ring as possible and them crimp the bead closed with the pliers

 Trim off the excess end of the wire like so

 And then begin stringing

 Add a crimp bead to another jump ring on the opposite end of the chain to complete your necklace

 Finished product without tassel :) 

You can start by making a couple of decorative strung beads to hang next to your tassel by adding some beads to a head pin

 Twist the end into a loop

And then trim off the excess wire with the wire cutters

For the tassel, cut a few strips of sheer fabric in 3x3 squares.  I used standard tulle for the black tassel and crushed tulle for the white.  I much preferred the crushed tulle because it was softer and gauzier, not so stiff, but I could only find it in white at my local fabric store.  You could also buy a real tassel that you use for pillows and such, it would probably look really cute, a la Love Maegan.  I just couldn't find a color that I liked to go with the chartreuse green beads.

Basically just fold over the fabric and then tie a strip of tulle around the top to create a little pouf

Cut a straight line at the edge (or don't if you'd prefer not to); I just didn't want it to look so much like a ghost

 I'm sure there is a much fancier, more professional way to attach the poof but I couldn't figure it out :)  So I just threaded some of the beading wire though the top with a jump ring attached and then added a crimp bead to close off.  I then attached the tassel directly to the necklace with that jump ring. 

Add your tassel and the other decorative beads and you're done!

My necklace is a total of 36 inches in length, with the chain making up 20 inches and the beads making up 16 inches.  The color options with the project are endless.  My local bead store had so many crazy pretty choices it took me about 30 minutes to make a decision but I kept being drawn back to this acidic green color so just went with it.

 To change the tassel from black to white it's as simple as undoing the jump ring with your pliers and attaching the other tassel.  I love the black for a night time look and then the white for more of a day look.  I wore the white with a navy and striped maxi dress and it really popped against the navy. 

  

Source: fourflightsoffancy.blogspot.com